Rubber and steel bollard 700xØ90mm

Ground fixings available:

- Ref. 300-0003F: Fixing with direct sealing

- Ref. 300-0003M: Fixing with direct sealing and spring

- Ref. 300-0003E: Fixing with removable base, easy to remove and put back

Bollards to delimit spaces, fixed, flexible, or easy to remove and put back.

Recoverable after an impact.

The model with a spring is similar to the fixed one, but it is manufactured with a very strong inner spring that yields to the impact of the car, minimizing damage and returning to its original position after the impact.

With first-class reflective material for nighttime signaling.

ASSEMBLY:

- For fixed models, a Ø 60 mm hole by 150 mm high is drilled.

- In the case of fixed models with a spring, the hole will be the same as in the fixed models, but at least 10 mm will be left between the lower edge of the bollard and the ground, so it can flex without breaking the spring.

- For the removable and put back models, two Ø 30 mm holes must be drilled to bury the iron rods.