H75 marker post in flexible yellow EVA foam.

Manufactured according to the UNE 135363:98 standard for cylindrical delineator posts.

Flexible EVA delineator post, which gives it a high degree of shape memory, durability, and high resistance to vehicle impact, with the ability to immediately and automatically return to its vertical position.

If desired, the installation tool is also available (ref. 990-0219: 17 mm).

Anchoring: Easy installation. In the event of breakage, road risk is minimized by the anchoring system, since the washer, being made of plastic, does not constitute a hazardous element on the roadway, as it encloses the metal screw inside.

Assembly instructions:

1. Drill a hole using a 12 mm drill bit to an approximate depth of 13 cm.

2. Insert the plug.

3. Using a 17 mm socket wrench, hold the screw from inside the post and secure it onto the plug.

4. Tighten the screw with the washer against the ground, making sure the fixing is firmly secured in the asphalt or surface, but without applying too much pressure so as not to break the delineator post.

If a tool is required for installation, reference 990-0219 must be included.