Flexible PVC wheelbarrow protector 508x127x50 mm

Flexible PVC protector for forklifts, forks, and other unloading machines. Prevents or minimizes damage from impacts or scratches, as well as dangerous situations and injuries to people, damage to vehicles, machines, structures, etc.

It can be placed both vertically on the forks and horizontally on the corners of the forklift.

Supplied per unit piece. It is secured with 2 magnets that can be reinforced with double-sided adhesive.

The adhesive is recommended to reinforce the fixation and prevent it from shifting sideways. For installation, it is recommended to first clean with alcohol, both the surface of the protector and the surface where it will be fixed, and let it dry. Then apply the double-sided adhesive tape. If placed on a vertical surface, apply pressure. Do not pull on the protector for at least 12 hours to allow the adhesive tape to set properly.

The brackets are for installation when used on forks. They keep the protector firmly in place. Tighten the nuts to keep the bracket in place.

They can be adjusted from 80 to 140 mm.