Red and white fire-resistant protection mat for INDOOR use. Thickness 10 mm.

* PRICE PER LINEAR METER

Available in the following colors and thicknesses:

- Ref. 110-0001: Yellow/Black and 20 mm thickness.

- Ref. 110-0002: Red/White and 20 mm thickness.

- Ref. 110-0011: Yellow/Black and 10 mm thickness.

- Ref. 110-0012: Red/White and 10 mm thickness.

MADE WITH FIRE-RESISTANT FOAM.

Fire behavior according to regulations: Fire resistance "European" B-s3-d0 Category EN 13501-1.

Excellent protection for walls and columns, recommended for flat or convex surfaces.

For concave surfaces, cuts should be made every 20 or 30 cm depending on the curvature.

For indoor use as exposure to sunlight may discolor part of the finish.

Made with fire-resistant materials of elastomeric cellular rubber, allowing it to conform to both columns and walls.

Equipped with a strong self-adhesive for easy installation. Depending on the surface texture, additional reinforcement with contact adhesive may be needed. Carpenter's glue with a rubber base can also be used.

The visible or outer face is made of 600 gr. canvas, available in standard colors of yellow and black or white and red.

The full roll is 10 linear meters, but it is also available for sale by the meter. Depending on quantities, color customization is possible (minimum order quantity varies by color).

INSTALLATION INSTRUCTIONS:

1. Clean and always dry the surface where the material will be installed. Dust and moisture are enemies of adhesives.

2. Do not apply tension or stretching when installing the material. Adhesive adhesion level depends on proper contact with the surface.

3. Bond strength increases over time.

4. The application temperature should be between 18-25ºC. At lower temperatures, the adhesive must be reactivated by applying heat at a temperature between 40 and 60ºC.