Circular signal of different sizes

Available in the following sizes and levels of reflectance

SIGNS Ø 50 CM (ECONOMIC):

- Ref. 340-0450: Without reflectance.

- Ref. 340-0451: Level I Reflectance

- Ref. 340-0452: Work sign with yellow background and Level I Reflectance.

SIGNS Ø 60 CM (MOPU):

- Ref. 340-0400: Without reflectance.

- Ref. 340-0401: Level I Reflectance

- Ref. 340-0402: Level II Reflectance

- Ref. 340-0403: Work sign with yellow background and Level I Reflectance.

SIGN Ø 90 CM (MOPU):

- Ref. 340-0405: Level I Reflectance

- Ref. 340-0406: Level II Reflectance

Signs with lacquered background on both sides and vinyl with different levels of reflectance on the front side.

Made of 1.8 mm thick galvanized steel sheet for MOPU signs and 0.8 for ECONOMIC signs, according to UNE 10204 3.1.b. EUR Standard, formed by stamping with a 25 mm perimeter flange.

They have standardized fastening for a 80 x 40 post. (screws and washers not included. If desired, request ref. 990-0247)

Cut with laser machinery and subsequently pressed with a 25mm perimeter flange. Alkaline multimetal degreasing and subsequent rinsing with osmosis water with a maximum conductivity of 0.65 micro. Subsequent application of powder paint, free of TGIC, with good mechanical properties and resistance to UV.

Manufactured to withstand extreme outdoor conditions

Dried in an oven at a temperature of 200º C through a tunnel, achieving a high-quality finish and resistance to abrasion, impacts, and corrosion

Subsequent application of normal or reflective vinyl with CE certification for retroreflective sheeting for use on vertical traffic signs. Class RA1, RA2, or RA3 vinyl complies with EN 12899-1:2007 standard