White or yellow plastic reflector. Reflectors in different colors with a reflectance level of 2.

Available references:

- Ref. 340-0025: White plastic with 2 in 2-sided white/amber reflex

- Ref. 340-0026: White plastic with 2 in 2-sided white reflex

- Ref. 340-0027: White plastic with 2 in 2-sided amber reflex

- Ref. 340-0028: Yellow plastic with 2 in 2-sided amber reflex

- Ref. 340-0029: Yellow plastic with 2 in 1-sided amber reflex

Beacon made of white or yellow plastic, highly resistant and incorporating a reflector.

Designed to delimit various road sections in low visibility conditions, making them more visible by reflecting the vehicle's light on the reflectors of the product.

Road studs refract the light from vehicles, delimiting the edges of the road on both the right side (usually amber) and the left side (usually white).

They can also be applied on concrete New Jersey barriers. The application will be done using resin or adhesive.

Body: Manufactured in high-impact ABS injected plastic

Reflectors: Injected in translucent acrylic plastic with high retroreflectivity and high-vacuum metallization. Reflectance level 2

ASSEMBLY

It is done with a special adhesive under the following criteria*:

- Straight sections: every 25 m on highways and every 15 m on conventional roads.

- Curves: every 5-10 m depending on the radius.

- Exits and merges every 5-3 m.

*These criteria are indicative, as there is no standard setting these parameters. Its use is temporary, as it is intended to mark work areas.